Not a lot of activity on the board so let me ask this question here instead of a different forum.
My navigation lights (both red and green) do the same thing. The bulbs last for a short while (couple hours) then stop working. The filiment doesn't blow!! It's almost like a contact problem. They are "festoon" bulbs. They have a contact on the top and the bottom. It's like corrosion of some sort keeps from making good contact.
My main question is can I use some type of "electrical" grease (looks like white vasoline) and put just a light coating on the top and bottom of the bulb to improve the connection?
I don't use them very often, so they may go unused for a month, then I turn them on and they work fine. But use them for several hours, and one or both of them stop working.
If I put in a new bulb, they work fine again.
I've tried sandpapering the little "donut" contacts, but it still occurs. It's such a pain, that if I see some LED nav. lights that would fit my bow; I might just switch them out when available.
I hope I explained it well enough for a response
.
5th (Marty)
Need some help
Threaded Mode