No Sirius Weather After Ray Firmware Upgrade
 

I did the Raymarine software upgrade on my E120 and now the Weather function does not work. I get a message that says no connection. After a while that changes to "no signal". It never does come on.

the subscription is good through Feb 2010.

I tried the "pull the plug" method, but no dice. Then I did a system re-set, checked to make sure the Sirius number was still there, and got the same results. Still getting the "No Signal" on the top of the screen. I did look at the SR100 to see if it was flashing an error code light, but the green light says its OK.

Did a system reset
Did unplug antenna routine Can't turn in the SR100 with out turning on the E120.

Any ideas?